Our pool shelters
MARINA 90

Our models
Low pool enclosure Marina 90

You dream of a pool enclosure without it being too imposing in your garden? The low pool enclosure MARINA 90 is made for you!

The low pool enclosure MARINA 90 has an accordion front and a height at the lowest part of 90 cm. This is enough height to be able to sit and enjoy your pool all season long.

The MARINA 90 pool cover

The MARINA 90 pool enclosure offers the comfort of a light pool cover, while securing your pool.

At VERANDAIR®, we guarantee the same strength for all our pool enclosure models, so our low pool enclosures are actually “small high enclosures”. The aluminum structure of our pool enclosures is common to each pool enclosure.

Véranda rétractable pour particuliers
véranda rétractable pour les particuliers

The MARINA 90 pool enclosure in detail

The MARINA 90 model is designed to offer a snow load resistance up to 60kg/m2. On request, we can increase the resistance up to 120kg/m2.

The MARINA 90 can be realized with straight sides (also called “3 angles”) or with cut sides (also called “5 angles”) as an option. In its standard version, the MARINA 90 model is composed of “x” sliding elements, 1 fixed element, 1 accordion front and 1 fixed bottom.

Composition of the MARINA 90 model

  • (x) elements including 1 fixed element
  • 1 accordion front without door
  • 1 fixed bottom with sliding door in the widest element
  • The doors are equipped with locks with keys
  • The accordion front with an overhang to the outside of the shelter
  • The height of the brushes between the folding front and the floor is 50 mm
  • The height of the brushes between the fixed bottom and the ground is 50 mm
  • The wheels are made of polyamide with a diameter of 100 mm. There are 8 of them per element.
  • The accessories are made of A2 stainless steel or aluminum
  • Anchors are made of stainless steel A2 with a diameter of M14 and a depth of 160 mm

Composition of the MARINA 90 model

  • The anchors are fixed by a 2-component chemical sealant (epoxy)
  • The anchors are provided with plugs
  • The ground fasteners are made of A2 stainless steel bolts with a butterfly head
  • The floor fixings of the first mobile element are provided with keys
  • The side walls are provided with 4 mm SAN transparent sheets
  • The roofs are equipped with translucent cellular sheets of PC (6 mm polycarbonate)
  • The waterproofing between the elements is made of nylon brushes on stainless steel doseret
  • The height of the first element is 0.90 m and is measured at the withers and inside the shelter (see plans)
  • The theoretical length is always a multiple of 2.10 m. It is important to refer to the plans to see the real dimensions, which are often greater than the theoretical dimensions.
  • Other dimensions and types of construction on request

Customization of the pool cover

ON SIMPLE REQUEST IT IS POSSIBLE (WITHOUT EXTRA CHARGE):

  • Reverse the opening direction of the enclosure by reversing the front and back
  • Move the sliding door in the front and/or the back
  • Change the height of the brushes of the folding front and the fixed back
  • Raise the fixed bottom to allow it to be moved without scratching the floor (large brushes)
  • Replace the translucent roofing sheets with white sheets of the OPALIN type
  • Replace the brushes between the elements by black EPDM joints
Véranda rétractable pour particuliers
véranda rétractable pour les particuliers

Important notes

  • There is a possible tolerance of 3% between the theoretical dimensions validated by the customer through the plans and the actual dimensions of the product delivered. The seller and his customer must take this into account and allow for the tolerances necessary to place the enclosure without difficulty.
  • The pool enclosure proposed here is equipped with a light aluminum structure that meets the French standard NF P90-309, is capable of resisting a snow load equivalent to or less than 60kg/m2. In case of snow, it is important to remove snow from the shelter to avoid the risk of irreversible deformation.
  • The system of sliding modules on wheels can in no way be considered as a hermetic building, both in terms of roofs, doors, openings, glass surfaces, between sliding elements and other junction systems.
  • The customer shall ensure that the support (floor) of the pool enclosure is provided with a concrete sill of at least 15 cm thickness at the level of its runway.
    In order to avoid rainwater infiltration through the floor, the customer must ensure that the slope of the tiles starts at the highest point on the inside and goes towards the outside of the enclosure. In general, a slope of 1% is considered sufficient.

Low pool enclosure – MARINA 90
The plans

abri-de-piscine-haut-panama-fiche-technique 1
abri-de-piscine-haut-panama-fiche-technique2
La pergola Verandair

VERANDAIR® pool enclosures : our strengths
Why choose a VERANDAIR® low pool enclosure ?

An affordable price

Enjoy your terrace all year round

A veranda adapted to your own dimensions

Reliability & robustness

Aluminium structure 15 year warranty

Use of 100% renewable materials

100% Belgian production for over 31 years

Delivery and installation of your veranda by professionals

VERANDAIR®
Notre savoir-faire

VERANDAIR® quality
Discover our others models

Retractable Verandas

Professional Verandas

Pergolas

Satisfied customers

years of guarantee*

Dedicated staff

Years of experience

Opinions and testimonials
What our customers say about us

C.D.

We put our trust in VERANDAIR and we do not regret it at all. Our pergola was installed by competent, careful people. The after-sales service is impeccable.

C.D

P.C.

The result exceeds the buyer’s expectations… Meticulous and precise work, the follow-up from the manufacturing plans to the final assembly and even the small corrections afterwards, it is very professional!
Congratulations to all the teams who contributed to this.

P.C

M.D.

Top team, boss available. Happy with my investment…

M.D

J-L.L

We had no idea how much the addition of a patio cover (45 m2) would improve our quality of life. The Verandair staff guided us to the most suitable solution. There were no nasty surprises. The installation team is as nice as they are efficient (they put in a lot of hard work!). We recommend them 100%.

J-L.L

V.Y

Very happy! Beautiful finish…quality, seriousness and cleanliness from the placement team! All in a friendly manner and with good advice! Belgian company based in Wallonia, eager to meet our expectations throughout our project! To be recommended!

V.Y

Are you interested in our pool enclosures?





    Vous avez un projet ? Une question ?Contactez le service adéquat
    Contactez-nousContactez-nous