Our pool shelter

Our models
Low pool enclosure RIVIERA 90

You have a swimming pool but you don’t enjoy it enough during the summer season? The gray and rain in summer, prevents you from swimming in your pool? The RIVIERA 90 low pool enclosure is an ideal solution to cover and secure your pool.

The RIVIERA 90 low pool enclosure is a pool cover with a tilting front, like a “garage door”. A real asset for easy access to your pool.

The interior height at the lowest element is 90 cm. This height allows you to fully enjoy your pool and even sit around it.

Pool shelter by Pool Cover

The RIVIERA 90 pool cover

The RIVIERA 90 pool cover is a sturdy pool cover that allows you to secure your pool, while better preserving the temperature and cleanliness of the water.

The RIVIERA 90 model, like all other Pool Cover models by VERANDAIR®, is designed to offer a snow load resistance up to 60kg/m2. On request, we can increase the resistance up to 120kg/m2.

Véranda rétractable pour particuliers
véranda rétractable pour les particuliers

RIVIERA 90 : Construction

The RIVIERA 90 can be made with right sides (also called “3 angles”) or with cut sides (also called “5 angles”) as an option.

In its standard version, the RIVIERA model is composed of “x” sliding elements (depending on the length of your pool), 1 fixed element, 1 tilting front and 1 fixed bottom.

Composition of the RIVIERA 90 model

  • (x) elements of which 1 fixed element
  • 1 up-and-over garage door with a sliding door in the narrowest element
  • 1 fixed bottom with a sliding door in the widest element
  • The doors are equipped with locks with keys
  • The height of the brushes between the tilting front and the floor is 50mm
  • The height of the brushes between the fixed bottom and the floor is 50mm
  • The wheels are made of polyamide with a diameter of 100mm. There are 8 of them per element.
  • The accessories are made of A2 stainless steel or aluminum
  • The anchors are made of stainless steel A2 with a diameter of M14 and a depth of 160mm
  • The anchors are fixed by a 2 component chemical seal (epoxy)

Composition of the RIVIERA 90 model

  • Anchors are provided with plugs
  • The ground fasteners are made of A2 stainless steel bolts with butterfly head.
  • The floor fasteners of the first mobile element are provided with keys.
  • The side walls are provided with 4 mm thick SAN transparent sheets.
  • The roofs are equipped with translucent cellular plates in PC (6 mm polycarbonate).
  • The watertightness between the elements is ensured by nylon brushes on stainless steel doseret.
  • The height of the first element is 0,90m and is measured at the garot and inside the shelter (see plans).
  • The theoretical length is always a multiple of 2.10m. It is important to refer to the plans to know the real dimensions, which are often higher than the theoretical dimensions.
  • Other dimensions and types of construction on request

Customization of the pool cover


  • Move the sliding door in the front and/or the bottom
  • Change the height of the brushes of the tilting front and the fixed bottom
  • Raising the fixed floor to allow it to be moved without scratching the floor (large brushes)
  • Replace the translucent roofing sheets with white sheets of the OPALIN type
  • Replace the brushes between the elements by black EPDM seals
Véranda rétractable pour particuliers
véranda rétractable pour les particuliers

Important notes

  • There is a possible tolerance of 3% between the theoretical dimensions validated by the customer through the plans and the actual dimensions of the product delivered. The seller and his customer must take this into account and allow for the tolerances necessary to place the enclosure without difficulty.
  • The pool enclosure proposed here is equipped with a light aluminum structure that meets the French standard NF P90-309, is capable of resisting a snow load equivalent to or less than 60kg/m2. In case of snow, it is important to remove the snow from the shelter to avoid the risk of irreversible deformation.
  • The system of sliding modules on wheels can in no way be considered as a hermetic building, both in terms of roofs, doors, openings, glass surfaces, between sliding elements and other junction systems.
  • The customer shall ensure that the support (floor) of the pool enclosure is provided with a concrete sill of at least 15 cm thickness at the level of its runway.
    In order to avoid rainwater infiltration through the floor, the customer must ensure that the slope of the tiles starts at the highest point on the inside and goes towards the outside of the enclosure. In general, a slope of 1% is considered sufficient.

Low pool enclosure
The plans

abri-de-piscine-haut-panama-fiche-technique 1
La pergola Verandair

Verandas VERANDAIR® : our strengths
Why choose a VERANDAIR® pool enclosure ?

An affordable price

Enjoy your terrace all year round

A veranda adapted to your own dimensions

Reliability & robustness

Aluminium structure 15 year warranty

Use of 100% renewable materials

100% Belgian production for over 31 years

Delivery and installation of your veranda by professionals

Our expertise

VERANDAIR® quality
Discover our others models

Retractable Verandas

Professional Verandas


Satisfied customers

years of guarantee*

Dedicated staff

Years of experience

Opinions and testimonials
What our customers say about us


We put our trust in VERANDAIR and we do not regret it at all. Our pergola was installed by competent, careful people. The after-sales service is impeccable.



The result exceeds the buyer’s expectations… Meticulous and precise work, the follow-up from the manufacturing plans to the final assembly and even the small corrections afterwards, it is very professional!
Congratulations to all the teams who contributed to this.



Top team, boss available. Happy with my investment…



We had no idea how much the addition of a patio cover (45 m2) would improve our quality of life. The Verandair staff guided us to the most suitable solution. There were no nasty surprises. The installation team is as nice as they are efficient (they put in a lot of hard work!). We recommend them 100%.



Very happy! Beautiful finish…quality, seriousness and cleanliness from the placement team! All in a friendly manner and with good advice! Belgian company based in Wallonia, eager to meet our expectations throughout our project! To be recommended!


Are you interested in our pool enclosures?

    Vous avez un projet ? Une question ?Contactez le service adéquat