Our pool shelter

Our models
Super low pool enclosure

Would you like to cover your pool discreetly? Install a lighted pool enclosure that allows you to secure your pool while maintaining its temperature? The super low terrace enclosure is ideal for you! 

The BEAU-RIVAGE pool enclosure has a minimum interior height of 17 cm. A pool enclosure that offers you the possibility to enjoy the view of your pool all year round! A must for your garden! 

Pool shelter by Pool Cover

The BEAU-RIVAGE pool cover

The BEAU-RIVAGE pool enclosure is a pool cover characterized by its minimum height of 17 cm.

At VERANDAIR®, all pool covers are made in the same way. Thus, the aluminum structures are light and reliable, especially with regard to snow load.

Véranda rétractable pour particuliers
véranda rétractable pour les particuliers

Construction of the BEAU-RIVAGE pool enclosure

The BEAU-RIVAGE model is designed to offer a snow load resistance up to 60kg/m2. On request, we can increase the resistance up to 120kg/m2.

The BEAU-RIVAGE is always made with right sides (also called “3 angles”). In its standard version, the BEAU-RIVAGE model is composed of “x” sliding elements (depending on the length of your pool), 1 fixed element and 2 fixed bottoms.

Composition of the model BEAU – RIVAGE

  • (x) elements including 1 fixed element
  • 1 accordion front with a French door integrated in the narrowest element
  • 1 fixed back with a sliding door in the widest element
  • The doors are equipped with locks with keys
  • Accordion front with an overhang towards the interior of the shelter
  • The height of the brushes between the folding front and the floor is 50 mm
  • The height of the brushes between the fixed bottom and the ground is 50 mm
  • The wheels are made of polyamide with a diameter of 100 mm. There are 8 of them per element.
  • The accessories are made of A2 stainless steel or aluminum
  • Anchors are made of stainless steel A2 with a diameter of M14 and a depth of 160 mm

Composition of the model BEAU – RIVAGE

  • The anchors are fixed by a 2-component chemical sealant (epoxy)
  • The anchors are provided with plugs
  • The ground fasteners are made of A2 stainless steel bolts with a butterfly head
  • The floor fixings of the first mobile element are provided with keys
  • The side walls are provided with 4 mm SAN transparent sheets
  • The roofs are equipped with translucent cellular sheets of PC (6 mm polycarbonate)
  • The waterproofing between the elements is made of nylon brushes on stainless steel doseret
  • The height of the first element is 2 m and is measured at the garot and inside the shelter (see plans)
  • The theoretical length is always a multiple of 2.10 m. It is important to refer to the plans to see the actual dimensions, which are often greater than the theoretical dimensions.
  • Other dimensions and types of construction on request



  • Reverse the opening direction of the enclosure by inverting the front and the back
  • Move the sliding door in the front and/or the back
  • Change the height of the brushes of the folding front and the fixed bottom
  • Raise the fixed bottom to allow it to be moved without scratching the floor (large brushes)
  • Replace the translucent roofing sheets with white sheets of the OPALIN type
  • Replace the brushes between the elements with black EPDM seals
Véranda rétractable pour particuliers
véranda rétractable pour les particuliers

Important notes

  • There is a possible tolerance of 3% between the theoretical dimensions validated by the customer through the plans and the actual dimensions of the product delivered. The seller and his customer must take this into account and allow for the tolerances necessary to place the enclosure without difficulty.
  • The pool enclosure proposed here is equipped with a light aluminum structure that meets the French standard NF P90-309, is capable of resisting a snow load equivalent to or less than 60kg/m2. In case of snow, it is important to remove the snow from the shelter to avoid the risk of irreversible deformation.
  • The system of sliding modules on wheels can in no way be considered as a hermetic building, both in terms of roofs, doors, openings, glass surfaces, between sliding elements and other junction systems.
  • The customer shall ensure that the support (floor) of the pool enclosure is provided with a concrete sill of at least 15 cm thickness at the level of its runway.
    In order to avoid rainwater infiltration through the floor, the customer must ensure that the slope of the tiles starts at the highest point on the inside and goes towards the outside of the enclosure. In general, a slope of 1% is considered sufficient.

Super low pool enclosure
The plans

abri-de-piscine-haut-panama-fiche-technique 1
La pergola Verandair

Verandas VERANDAIR® : our strengths
Why choose a pool cover made by VERANDAIR®?

An affordable price

Enjoy your terrace all year round

A veranda adapted to your own dimensions

Reliability & robustness

Aluminium structure 15 year warranty

Use of 100% renewable materials

100% Belgian production for over 31 years

Delivery and installation of your veranda by professionals

Our expertise

VERANDAIR® quality
Discover our others models

Retractable Verandas

Professional Verandas


Satisfied customers

years of guarantee*

Dedicated staff

Years of experience

Opinions and testimonials
What our customers say about us


We put our trust in VERANDAIR and we do not regret it at all. Our pergola was installed by competent, careful people. The after-sales service is impeccable.



The result exceeds the buyer’s expectations… Meticulous and precise work, the follow-up from the manufacturing plans to the final assembly and even the small corrections afterwards, it is very professional!
Congratulations to all the teams who contributed to this.



Top team, boss available. Happy with my investment…



We had no idea how much the addition of a patio cover (45 m2) would improve our quality of life. The Verandair staff guided us to the most suitable solution. There were no nasty surprises. The installation team is as nice as they are efficient (they put in a lot of hard work!). We recommend them 100%.



Very happy! Beautiful finish…quality, seriousness and cleanliness from the placement team! All in a friendly manner and with good advice! Belgian company based in Wallonia, eager to meet our expectations throughout our project! To be recommended!


Are you interested in our pool enclosures?

    Vous avez un projet ? Une question ?Contactez le service adéquat