Our models
Mid rise pool enclosure BOSTON
Halfway between the low pool cover and the high residential pool cover, the BOSTON half-high pool cover combines all the advantages.
Indeed, this pool cover is high enough to be able to move around the pool easily, without being too high and taking up too much space in your garden. Its height is generally studied to meet the needs of customers wishing to avoid any administrative procedures related to the building permit.
The half-high pool enclosure has a frontage with an accordion and is ideal to cover your pool, maintain the water temperature and secure it effectively.
Pool shelters by Pool Cover
mid-rise BOSTON
The BOSTON pool enclosure
Do you dream of a safe, reliable and sturdy pool enclosure? Then the BOSTON pool cover is for you! The pool cover is designed to withstand a snow load of up to 60 kg/m2.
The BOSTON can be made with straight sides (also known as “3 angles”) or with cut sides (also known as “5 angles”) as an option.
Construction of the BOSTON pool enclosure
In its standard version, the BOSTON model is composed of “x” sliding elements (depending on the length of the pool), 1 fixed element, 1 accordion front and 1 fixed bottom.
This model can also be leaned against a wall (leaned = back to a wall) and can be customized to match your desires and needs.
Composition of the BOSTON model
- (x) elements including 1 fixed element
- 1 accordion front with a French door integrated in the narrowest element
- 1 fixed back with a sliding door in the widest element
- The doors are equipped with locks with keys
- Accordion front with an overhang to the outside of the enclosure
- The height of the brushes between the accordion front and the floor is 50mm
- The height of the brushes between the fixed bottom and the ground is 50mm
- The wheels are made of polyamide with a diameter of 100mm. There are 8 of them per element.
- The accessories are made of A2 stainless steel or aluminum
- Anchors are made of stainless steel A2 with a diameter of M14 and a depth of 160mm
Composition of the BOSTON model
- The anchors are fixed by a 2-component chemical sealant (epoxy)
- The anchors are provided with plugs
- The ground fasteners are made of A2 stainless steel bolts with a butterfly head
- The floor fixings of the first mobile element are provided with keys
- The side walls are provided with 4 mm SAN transparent sheets
- The roofs are equipped with translucent cellular sheets of PC (6mm polycarbonate)
- The sealing between the elements is made of nylon brushes on stainless steel backsplash
- The height of the highest element is 1.80m (see plans)
- The theoretical length is always a multiple of 2.10m. It is important to refer to the plans to see the actual dimensions, which are often larger than the theoretical dimensions.
- Other dimensions and types of construction on request
Personalization
ON REQUEST IT IS POSSIBLE (WITHOUT EXTRA CHARGE):
- Reverse the opening direction of the enclosure by inverting the front and the back
- Move the sliding door in the front and/or the back
- Change the height of the brushes of the folding front and the fixed bottom
- Raise the fixed bottom to allow it to be moved without rubbing the ground (large brushes)
- Replace the translucent roofing sheets with white sheets of the OPALIN type
- Replace the brushes between the elements by black EPDM joints
Important notes
- There is a possible tolerance of 3% between the theoretical dimensions validated by the customer through the plans and the actual dimensions of the product delivered. The seller and his customer must take this into account and allow for the tolerances necessary to place the enclosure without difficulty.
- The pool enclosure proposed here is equipped with a light aluminum structure that meets the French standard NF P90-309, is capable of resisting a snow load equivalent to or less than 45kg/m2. In case of snow, it is important to remove snow from the shelter to avoid the risk of irreversible deformation.
- The system of sliding modules on wheels can in no way be considered as a hermetic building, both in terms of roofs, doors, openings, glass surfaces, between sliding elements and other junction systems.
- The customer shall ensure that the support (floor) of the pool enclosure is provided with a concrete sill of at least 15 cm thickness at the level of its track.
In order to avoid rainwater infiltration through the floor, the end customer must ensure that the slope of the tiles starts at the highest point on the inside and goes towards the outside of the enclosure. In general, a slope of 1% is considered sufficient.
Mid rise pool enclosure BOSTON
The plans
VERANDAIR® pool enclosures: our strengths
Why choose a pool cover made by VERANDAIR® ?
An affordable price
Enjoy your terrace all year round
A veranda adapted to your own dimensions
Reliability & robustness
Aluminium structure 15 year warranty
Use of 100% renewable materials
100% Belgian production for over 31 years
Delivery and installation of your veranda by professionals
VERANDAIR®
Our expertise
VERANDAIR®quality
Discover our others models
Retractable Verandas
Professional Verandas
Pergolas
Satisfied customers
years of guarantee*
Dedicated staff
Years of experience
Opinions and testimonials
What our customers say about us
C.D.
We put our trust in VERANDAIR and we do not regret it at all. Our pergola was installed by competent, careful people. The after-sales service is impeccable.
C.D
P.C.
The result exceeds the buyer’s expectations… Meticulous and precise work, the follow-up from the manufacturing plans to the final assembly and even the small corrections afterwards, it is very professional!
Congratulations to all the teams who contributed to this.
P.C
M.D.
Top team, boss available. Happy with my investment…
M.D
J-L.L
We had no idea how much the addition of a patio cover (45 m2) would improve our quality of life. The Verandair staff guided us to the most suitable solution. There were no nasty surprises. The installation team is as nice as they are efficient (they put in a lot of hard work!). We recommend them 100%.
J-L.L
V.Y
Very happy! Beautiful finish…quality, seriousness and cleanliness from the placement team! All in a friendly manner and with good advice! Belgian company based in Wallonia, eager to meet our expectations throughout our project! To be recommended!
V.Y
Are you interested in our pool enclosures?