The low pool enclosure

Thelow pool enclosure is distinguished by its discretion and its ability to blend perfectly into your garden without obstructing the view. And yes, it offers effective protection while preserving the aesthetics of your outdoor space, which is not entirely the case with a high pool enclosure.

There is a a possible tolerance of 3%. between the theoretical dimensions validated by the customer through drawings and the actual dimensions of the product delivered. The seller and his customer must take this into account and allow for the tolerances needed to place the shelter without difficulty.

Requirements can vary, but in general, low pool enclosures don't require planning permission, especially as they are so low. However, we recommend that you check your local regulations before installing your low pool abi.

The system of sliding modules on castors can never be considered a hermetic building, whether in terms of roofs, doors, openings, glazed surfaces, between sliding elements or other connecting systems.

The customer must ensure that the support (floor) for the pool enclosure is provided witha concrete sill at least 15 cm thick at the level of its runway.

The pool enclosure featuresa lightweight aluminum structure compliant with French standard NF P90-309. He is able to withstand a snow load equivalent to or less than 60kg/m2. In case of snow, it is important to clear snow the shelter to avoid the risk of irreversible deformation.

To prevent rainwater infiltration through the floor, the customer must ensure that a slope in the tiling which starts at its highest point on the inside, towards the outside of the shelter. In general, a 1% slope is considered sufficient.